If there is no icon to start Trumpet Winsock,you can use File Manager and double click on tcpman.exe which will launch Trumpet under Win3.1.

• Click File and then Setup:

• Enter the Name Server as 206.191.48.2 206.191.48.3 (Our DNS1&DNS2, separated by a space)
• Remove the check beside Internal PPP
  • Change the IP address to 0.0.0.0
  • Change the Netmask to 255.255.255.0
  • Change the Default gateway to 0.0.0.0
  • Change the Packet vector to 00
• For a modem/PAP connection, use
  • MTU=512
  • TCP WIN=2048
  • TCP MSS=512
• Replace the check beside Internal PPP
• Change the SLIP Port to that of your modem COM port
  • Change the Baud Rate to that of your modem
  • Hardware Handshake is checked
  • Van Jacobson CSLIP compression is not checked
  • Online Status Detection can be DSD (RLSD)
• Click on OK
• Restart Trumpet for the new settings to take effect

The next thing that needs to be setup is the number for dialing in and the authentication information.

• Go to the Dialer menu and click Setup.CMD
• When you run the script, you will see the following:

There is a second place you need to enter the username and password.

Those are the basics of Trumpet Winsock. To connect:

Minimize Trumpet when you're connected and set off on the internet.

You have further control on your connection (auto disconnect; re-connection):

If there is a problem with the script, you do have the option of manually logging in.